7 Simple Secrets To Totally Making A Statement With Your Defra Approved Back Boiler Stoves

· 6 min read
7 Simple Secrets To Totally Making A Statement With Your Defra Approved Back Boiler Stoves

Defra Approved Back Boiler Stoves

When choosing the best stove for your home there are a variety of aspects to take into consideration. The appeal of dual function is just one of the many aspects to take into consideration.

Back boiler stoves that have been approved by DEFRA are an excellent solution to these problems. They produce very little smoke because they use the minimum amount combustion air.

Clean Burn Technology

A back boiler stove that is defra-approved is a great option to get an efficient and clean burning stove that can provide heat to your home as well as provide hot water to your radiators. The stoves come with an integrated steel boiler that can be used for heating your central heating system while the fire burns within the stove, this means it's a much more efficient way to use wood burning stoves.

Most of our defra-approved back boiler stoves have a pre heated, airwashing system to keep the glass doors clean of soot and ash. The secondary combustion system re-burns any particles that were not burned during the initial combustion. This keeps the flue gases clean which results in an efficient burn and lower fuel costs, which can save you money on your energy costs.

Some of our stoves are more eco-friendly and have been independently tested to ensure they meet the new stricter DEFRA emission standards to become Defra SE (Smoke Exempt) approved. The stoves accomplish this by having an air vent at the top that stops you from closing it completely that would shut off oxygen flow to the flame. This causes the fire to smolder instead of burning cleanly and release more pollutants into the atmosphere.

The moisture content of the fuel can be a major factor in the amount of smoke that is released from an oven. We recommend burning only dried, seasoned wood with a minimum moisture content of 20 percent to ensure your stove burns as efficiently and effectively as possible. Most of our Defra approved stoves come with built-in moisture sensors that adjusts the burn rate accordingly when using damp or wet wood.

Some manufacturers have gone a step further to improve efficiency by incorporating a second clean burn system. This is controlled by a chrome lever at the lower part of the stove. It opens and closes an air vent that draws the air over the fire, and then reburns the smoke created by the initial combustion process. Our Defra SE approved ranges are now even more efficient. You can save money on your energy costs.

Easy to Clean

A defra approved back boiler stove can be used to run your central heating as well as hot water from the same system. This can be done by connecting a loop between other taps on the back-boiler (there typically two) and your hot water tank. You can then utilize thermosyphoning to transfer heat into the home. This also means that your boiler will never run out of hot water, because it is fed from the tank.

Clean your stove regularly to maintain its optimal performance. Start by ensuring that the stove is cold to the touch, then wipe the body of the stove as well as the door with a clean and dry cloth. We recommend using a microfiber towel, as these are far less abrasive than cotton ones.

It is a good idea after cleaning the stove's interior, to clean the glass. Glass cleaners are available at most hardware stores and can be used to remove stubborn marks and stains. Glass cleaner should be used sparingly as too much can damage glass surfaces.

Over  relevant webpage , the seals around the glass of your stove's and doors can start to wear out. This can lead to gaps that could leak heat and cause heat loss, which is why it is essential to replace the seals at least once a year. This can be done with stove rope, which can be found in most hardware stores.

If you own an Eco Design 2022-compliant back boiler that is installed on an approved defra stove the combustion process will be much more efficient than with traditional wood burning stoves. This is because the latest technologies have reduced the amount of part-burned combustibles that release into the atmosphere. Stoves that are compliant are more environment efficient and are also less expensive to operate.

A back boiler stove is always more expensive than an ordinary multifuel stove since it produces more hot water. It's still a cost-effective way to heat your home and is able to be used for central heating as well as hot-water.

Easy to Install

Boiler stoves are a stylish and efficient option that can provide hot water and heat for your central heating system. A wood burner with back boiler is distinct from other multi-fuel stoves that need to be connected to gas boilers. It is able to connect directly to the central heating and hot water of your home, eliminating the need for a second heating system.


Wood burning stoves that include a back boiler are also an excellent choice for those looking to be green. They also emit less carbon dioxide because they burn logs or pellets, rather than gas or oil heating system, making them a great option for those concerned about global warming.

Installing a wood-burning fireplace with a boiler is fairly simple. It is essential to ensure that the stove is installed correctly and connected to your heating system. This is best done by a trained heating technician. They can assist you in making sure that your stove has been properly installed and connected to the correct systems, as well as making sure that all the safety features are in place.

Defra Approved Stoves, also known as Defra exempt stoves as they are referred to, have met the Department of Environment, Food and Rural Affairs' (DEFRA) standards for smoke emission levels. They are allowed to be used in Smoke Control Areas and have been tested and modified to ensure they provide a clean burning that is able to be used with both wood and smokeless fuels.

DEFRA approved stoves like the Defra Exempt Dunsley Yorkshire or our most popular Hi-Flame Aidan stove can provide a highly efficient burn while producing very little harmful emissions. They have been tested in accordance with the Eco-Design regulations, which imposes limits on the amount particulate matter (PM) as well as CO2, NOx and organic gases the stove emits in normal operation.

Suitable for Smoke Control Areas

Smoke Control Areas are in place in most UK cities and towns. The burning of logs on older fireplaces or stoves could result in a fine if smoke is considered to be an issue. The good news is that Defra Approved back boiler stoves are not subject to these restrictions if you choose the right appliance for your home.

Defra exempt wood burners are made to utilize Clean Burn technology which ensures that the fuel used is burnt efficiently with minimal smoke production. You can still enjoy a beautiful fireplace if you reside in a smoke-free zone, however logs must be limited to mineral fuels that are smoke-free.

To be in compliance with Defra requirements, these stoves feature airtight chambers that are precisely controlled for airflow and typically use triple airflow systems to ensure that combustion byproducts are burnt up before they can escape the chimney. This reduces the nuisance smoke and minimizes the accumulation of soot that can block the flue and reduce gas efficiency.

It is crucial to purchase a Defra-approved stove from a reputable local retailer who can make sure that the right size stove is chosen for your area to ensure the most efficient heating performance, and that it is installed correctly by a registered HETAS installer. They can also assist you with choosing the most suitable chimney liner to ensure a safe and efficient installation. They can also help you decide if your home requires additional ventilation.

Modern DEFRA approved stoves are far superior to traditional open fires or wood burning stoves. They offer a minimum 75 percent efficiency, which is does not only lessen your carbon footprint but also saves you money. Defra approved back boiler stoves can be used in smoke controlled areas and require a minimum 6mm stainless steel twin-wall flexible chimney liner. This is cheaper than the more substantial 12mm liners required for Ecodesign stoves.

If you are in any doubt as to whether your home is within a smoke control area, check with your local council, who will be able to provide you with the latest information. Most reputable stove makers include a Defra exempt category within their ranges to help you to recognize these appliances.